Setup - VOLTCRAFT BS-5 Operating Instructions Manual

6 Hook attachment
7 Magnetic attachment
8 Colour monitor
9 button (view images)
10 button (back, zoom)
11 button (on/off, take snapshot)
12 button (camera LED light, forwards)
13 button (rotate image, delete image)
14 Battery compartment (on the rear panel, not shown)
15 On/off switch for flashlight

8. Setup

Only hold the camera head and goose neck in liquids that
are not connected to a power source. The goose neck
must not be submerged beyond the "IP67 max. water
level" mark.
The endoscope may only be used for inspecting facilities
that are not connected to a power source. The camera
head is made from metal and can lead to short circuits.
For safety reasons, turn off all power sources before each
inspection.
The bending radius must not be less than the minimum of
35 mm.
33