Download Print this page

DEVA VSNSEQT01 Manual

Vision exposed thermostatic sequential shower

Advertisement

Quick Links

Guarantee
Guarantee
Guarantee
Guarantee
Your product comes with a 5 year guarantee; this includes
2 years parts and labour, with the following 3 years parts only,
proof of purchase will be required.
This guarantee is invalid if the product is misused, incorrectly
installed, maintained or cleaned.
Installation
Installations should be carried out by a competent installer,
who must after completion, check for leaks, from both the
product and pipe work.
All installations must be carried out in compliance with Water
Bye Law Regulations, for further details contact your Local
Water Authority.
The product must be installed and used in such a way as not to
cause water damage, therefore water from the product must be
suitably directed and/or retained.
Cleaning
This product should be maintained using a clean damp cloth, do
not use abrasive agents or materials on the product surface.
For technical, installation, servicing advice and/or spare parts
please call:
CUSTOMER CARE LINE
0800 1951602
Deva reserves the right to change or improve the products described in any of its
publications
DTC INST 158 – 18.4.11 ISSUE 2
VSNSEQT01
VISION EXPOSED
VISION EXPOSED
VISION EXPOSED
VISION EXPOSED
THERMOSTATIC SEQUENTIAL
THERMOSTATIC SEQUENTIAL
THERMOSTATIC SEQUENTIAL
THERMOSTATIC SEQUENTIAL
SHOWER
SHOWER
SHOWER
SHOWER

Advertisement

loading
Need help?

Need help?

Do you have a question about the VSNSEQT01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DEVA VSNSEQT01

  • Page 1 For technical, installation, servicing advice and/or spare parts please call: CUSTOMER CARE LINE 0800 1951602 Deva reserves the right to change or improve the products described in any of its publications DTC INST 158 – 18.4.11 ISSUE 2...
  • Page 2 Contents Contents Contents Contents Dimensions Dimensions Dimensions Dimensions Operating Specification General Details Technical Data Installation Calibration Cartridge Change and Cleaning Elbow Filter Cleaning Dimensions Guarantee DTC INST 158 – 18.4.11 ISSUE 2...
  • Page 3: Operating Specification

    Cleaning or replacing elbow filters Cleaning or replacing elbow filters Cleaning or replacing elbow filters Cleaning or replacing elbow filters Operating Specification Operating Specification Operating Specification Operating Specification Through years of use, impurities and lime scale could build up on the filters in the elbows which could affect the performance of the product, you should then remove the filters and clean.
  • Page 4: General Details

    Cleaning or replacing cartridge Cleaning or replacing cartridge Cleaning or replacing cartridge Cleaning or replacing cartridge General Details General Details General Details General Details Using a 30mm spanner unscrew the cartridge and flange (1) from the valve (2) by turning anti-clockwise. The purchased product is a thermostatic sequential exposed shower valve.
  • Page 5 Cleaning or replacing cartridge Cleaning or replacing cartridge Cleaning or replacing cartridge Cleaning or replacing cartridge Installation (Always flu Installation (Always flu Installation (Always flu Installation (Always flush the system prior to installation) sh the system prior to installation) sh the system prior to installation) sh the system prior to installation) Through years of use, impurities and lime scale could build up on filter and Prepare the supply pipes for the mixer at 150mm centres and allow the pipe ends to...
  • Page 6: Installation

    Calibration Calibration Calibration Calibration Installation Installation Installation Installation Once installed the temperature settings can be adjusted, but note this product is a sequential mixer and therefore if the maximum outlet temperature is increased the Position the mounting bracket (1) over the drilled holes and secure to wall using minimum temperature will also increase.
  • Page 7 Installation Installation Installation Installation Installation Installation Installation Installation Screw the elbows (1) into the shower valve body and align so they point to the rear. Remove the plastic protection cover (1) from the valve. Push the shower valve (1) onto the mounting bracket secured to the wall, then push the elbows over the pipe ends and connect nuts (2) to shower valve and fully tighten nuts using a spanner.