Advertisement
Passenger L L ink C C hain
Installation and Removal Instructions
Thank you for choosing
Please read and follow the installation and
usage tips shown here. The few moments spent
familiarizing yourself with this product's features
will give you the best service possible for safe
winter driving.
Meets S.A.E. Class "S" requirements for vehicles
*
with limited clearance. (Refer to your vehicle
owner's manual)
This product is intended for use on snow and ice
*
covered roads. As such, it is legal in every state
and province in North America, including those
where studded tires are prohibited.
Refer to page four of this booklet for important
*
information regarding the use of this product.
CHAIN TIGHTENERS SHOULD BE USED WITH THIS
PRODUCT AND MUST BE PURCHASED SEPARATELY.
(1100 S S eries)
Quik G G rip
tire chains.
A p p roperly i i nstalled c c hain:
Important: We strongly recommend
that the chains be fitted to the tire
prior to actual use to insure proper
fit. Tire sizes may vary because of
age, manufacturer, tread or type.
Please ensure that the following
points are correct when installing
your chains.
1. The chain should drape at least 2
inches over each side of the tire from
the edge of the tread toward the rim.
2. Check to make sure that you
have the correct size chains and
that there is enough clearance
between the chain and bodywork,
suspension and brake parts, etc.
3. The chains should be tightened
as snug as possible using chain
tighteners. Smooth portion of
hooks should be against tire.
© Security Chain Co. Div of Burns Bros
Inc., Clackamas, OR 97015-0949
All rights reserved; no part may be
reproduced in any form or by any
means without written permission.
Div. of Burns Bros. Inc.
P.O. Box 949
Clackamas, OR 97015-0949
Advertisement
Table of Contents
Related Manuals for SCC QUICK GRIP 1100 Series
Summary of Contents for SCC QUICK GRIP 1100 Series
- Page 1 Passenger L L ink C C hain (1100 S S eries) Installation and Removal Instructions A p p roperly i i nstalled c c hain: Important: We strongly recommend that the chains be fitted to the tire prior to actual use to insure proper fit.
- Page 2 Pg. 2 Installation Park vehicle on firm level ground, and turn off the engine. Set the parking brake. Unroll the chains and lay them out flat making sure there are no twists or tangles. Make sure the smooth side of the cross chain hooks are toward the tire.
- Page 3 Pg. 3 Installation Attach the rubber tensioner to take up the additional slack. To make this simpler, attach the first hook at the “11 o’clock” position, the next at the “5 o’clock” position and so forth. Tighteners must be purchased separately. Close-U U p o o f i i nside f f astening s s ystem Removal Drive vehicle off highway to safe level ground.
- Page 4 (such as SCC’s Z-Chain or ladder-style cable products) should be used. If these cautions are ignored, Security Chain Co., and it’s distributors are not responsible for injury or vehicle damage.
Need help?
Do you have a question about the QUICK GRIP 1100 Series and is the answer not in the manual?
Questions and answers