SCC Quik Grip Installation And Removal Instructions

Truck L L ink C C hain
Installation and Removal Instructions
Thank you for choosing
Please read and follow the installation and usage
tips shown here. A few moments familiarizing
yourself with this product's features will give you
the best service possible for safe winter driving.
This product is intended for use on snow and ice
*
covered roads. As such, it is legal in every state
and province in North America, including those
where studded tires are prohibited.
Refer to page four of this booklet for important
*
information regarding the use of this product.
(Single)
Quik G G rip tire chains.
A p p roperly i i nstalled c c hain:
Important: We strongly recommend
that the chains be fitted to the tire
prior to actual use to insure proper
fit. Tire sizes may vary because of
age, manufacturer, tread or type.
Please ensure that the following
points are correct when installing
your chains.
1. The chain should drape at least 3
inches over each side of the tire from
the edge of the tread toward the rim.
2. Check to make sure that you
have the correct size chains and
that there is enough clearance
between the chain and bodywork,
suspension and brake parts, etc.
3. The chains should be tightened
as snug as possible. Security Chain
also recommends the use of chain
tighteners (sometimes referred to as
chain spreaders). Smooth portion of
hooks should be against tire.
© Security Chain Co. Div of Burns Bros
Inc., Clackamas, OR 97015-0949
All rights reserved; no part may be
reproduced in any form or by any
means without written permission.
Div. of Burns Bros. Inc.
P.O. Box 949
Clackamas, OR 97015-0949