Inserting/Replacing Batteries; Operation; Additional Functions; Maintenance And Cleaning - Renkforce 1052420 Operating Instructions Manual

Controls and Parts
(1) LED light
(2) Laser outlet - Attention, the laser beam is released here!
(3) Laser button
(4) LED button
(5) Batteries
(6) Stylus
Inserting/replacing batteries
• To open the battery compartment, unscrew the laser head from the shaft.
• Insert four new 1.5V button cells LR41 (5) into the battery compartment, paying at-
tention to the correct polarity. The minus pole of the button cells (5) must always
point towards the laser outlet (1) (also see illustration above).
• Screw the shaft of the laser pointer back together.
• If the projection gets darker, the batteries are becoming flat. Replace the cells with
new ones as described above.

Operation

• The laser pointer is switched on and off by means of the laser button (3).
• If the laser button (3) is depressed, the laser beam exits the laser outlet (2).
Additional functions
• Press the LED button (4) to activate the LED lamp.
• To use the pointer as a stylus, move the soft end of the stylus (6) over the touch-
sensitive screen of your device.
• For use as a pointer, pull the end of the stylus (6) to extend the telescopic pointer.
• Unscrew the head of the stylus (6) to use as a ballpoint pen
Maintenance and Cleaning
The product does not require any maintenance and should never be disassembled for
any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use aggressive detergents as these can cause discolouration of the case.
Disposal
a) Product
E lectronic devices are recyclable waste materials and must not be disposed
of in the household waste!
Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
Remove the batteries if there are batteries inserted and dispose of them
separately from the product.
b) Normal and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return used batteries
and rechargeable batteries. Do not dispose of used batteries in the household waste!
Batteries/rechargeable batteries contain harmful materials and are labelled
with the symbol shown to indicate that disposal in the household waste
is forbidden. The symbols of the relevant heavy metals are: Cd=cadmium,
Hg=mercury, Pb=lead (marking can be seen on the battery/rechargeable
battery, e.g. underneath the refuse bin symbol shown on the left).
You can return your used batteries/rechargeable batteries free of charge at
the official collection points of your community, in our stores, or at places
where batteries or rechargeable batteries are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the
environment.
Technical Data
Operating voltage............................... 6 V/DC
Batteries .............................................. 4 x button cells LR41
Laser wavelength............................... 630-680 nm
Laser output ........................................ <1 mW
Laser class .......................................... 2
Laser range ......................................... 100 m (in dark conditions)
Dimensions.......................................... 9.7 x 161 mm
Weight .................................................. 38.5 g
Operating conditions ......................... -10 to +40 °C / 30-80% rel. humidity
Storage conditions............................. -10 to +40 °C / 25-85% rel. humidity
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.