Subscribe to Our Youtube Channel
Related Manuals for enervent eWind-ventilation
Summary of Contents for enervent eWind-ventilation
- Page 1 18.10.2017 eWind-ventilation units Installing an external RH- or CO -sensor to eWind-automation...
-
Page 2: Electrical Safety
SAFETY General Electrical safety DANGER DANGER Always check that the equipment supply voltage Only an authorised electrician may perform any is switched off before opening the service hatch. actions in the electrical box. WARNING DANGER Follow the local regulations on electrical In case of malfunction, always find out the reason installations. -
Page 3: Installing External Sensors
INSTALLING EXTERNAL SENSORS The eWind- automation is already at the factory prepro- DANGER grammed for an external humidity (RH) -sensor. If the external sensor is a humidity sensor, changes to the sensor Only an authorised electrician may perform parameters are not required. If the external sensor is a CO electrical work in ventilation units. - Page 4 AI1ÆY1 ÆAI1 Setting of the control system sensor parameter for CO -sensor Simultaneously press buttons three times in the control panel. Using buttons , choose parameter c27. Choose the parameter for adjustment by pressing button for 3 seconds. Change the parameter value to ON using buttons Confirm the value by pressing button Exit the settings by simultaneously pressing buttons...
- Page 5 Installation manual for professionals...
-
Page 6: Electrical Diagram
Electrical diagram... - Page 7 Installation manual for professionals...
- Page 8 Enervent Oy Kipinätie 1 FIN-06150 Porvoo, Finland Tel. +358 207 528 800 Fax. +358 207 528 844 enervent@enervent.com www.enervent.com...
Need help?
Do you have a question about the eWind-ventilation and is the answer not in the manual?
Questions and answers