Page 1
ASSEMBLY INSTRUCTIONS MODEL #PC60 DINING CHAIR NOTE TO CUSTOMERS: For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
Page 2
Chair Assembly Tips The key to correct chair assembly is to loosely attach all of the bolts, then gradually tighten them in succession until all of them are secure. Completely tightening one or more bolts prematurely can result in the following: ISSUE: CHAIR IS UNLEVELED Cause: Chairs can be wobbly or unleveled if one or more bolts are fully tightened before...
Page 3
ASSEMBLY INSTRUCTIONS ITEM # PC 60 DINING CHAIR PARTS IDENTIFICATION Chair Seat 1 pc Front Legs 2 pcs Back leg 2 pcs HARDWARE IDENTIFICATION Ø6mm JCBC Bolt M6 x 55mm 8 pcs 2 3/16” Spring Washer 8 pcs Ø 1/4” Flat Washer 8 pcs Ø...