Safety; General Safety - Toro GrandStand 74527 Operator's Manual

Servicing the Fuel Filter ................................... 36
Electrical System Maintenance ........................... 36
Electrical System Safety ................................... 36
Servicing the Battery......................................... 36
Servicing the Fuses .......................................... 38
Drive System Maintenance .................................. 39
Adjusting the Tracking ...................................... 39
Checking the Tire Pressure............................... 39
Adjusting the Caster-Pivot Bearing ................... 40
Servicing the Caster Wheels and
Bearings........................................................ 40
Checking the Wheel-Lug Nuts .......................... 41
Checking the Wheel-Hub Nuts.......................... 41
Cooling System Maintenance .............................. 41
Cleaning the Air-Intake Screen ......................... 41
Cleaning the Cooling System............................ 41
Brake Maintenance ............................................. 42
Servicing the Brake .......................................... 42
Belt Maintenance ................................................ 42
Replacing the Transmission Belt ...................... 42
Controls System Maintenance ............................. 43
Adjusting the Motion-Control Levers ................. 43
Hydraulic System Maintenance ........................... 44
Hydraulic System Safety................................... 44
Hydraulic System Specifications....................... 44
Checking the Hydraulic Fluid ............................ 44
Replacing the Hydraulic Fluid and
Filters ............................................................ 45
Bleeding the Hydraulic System ......................... 46
Cleaning .............................................................. 47
Disposing of the Waste ..................................... 47
Storage ................................................................... 47
Cleaning and Storage ....................................... 47
Troubleshooting ...................................................... 49
Schematics ............................................................. 51

Safety

The following instructions have been adapted from
the ANSI and ISO standards.

General Safety

Always follow all safety instructions to avoid serious
personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep clear of any discharge opening. Keep
bystanders a safe distance away from the
machine.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Stop the machine and shut off the engine before
servicing, fueling, or unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger-personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this Operator's Manual.
4