Charging; How To Use; Telescopic Nozzle - Dirt Devil QUICK FLIP User Manual

CHARGING

A

HOW TO USE

TO USE: Slide the power switch to the ON position. (l = ON)
TO TURN UNIT OFF: Slide the power switch to the OFF position. (0 = OFF)
NOTE: Empty and clean the unit and filter after each use or after large pickups when the unit becomes full.

TELESCOPIC NOZZLE

A
NOTE: Use only the charger supplied by the manufacturer to recharge.
IMPORTANT: BEFORE FIRST USE, CHARGE YOUR UNIT FOR AT
LEAST 24 HOURS.
▪ Power switch must be in the OFF position.
▪ Plug charger into standard outlet. Plug barrel adaptor into charging port (A).
▪ The indicator light will come on to indicate that the appliance is charging.
▪ The light will not change when the unit is charged.
▪ It is normal for the charger to become warm to the touch when charging.
▪ If the operating time gets shorter after repeated use, let the unit run until it stops running.
Recharge for 24 hours and repeat monthly for best results.
1. A crevice tool is built-in to the nozzle and can be extended by pulling the extension
piece until it locks into position.
2. The extension can be retracted by depressing the arrow button (A) near the front of the
nozzle and pushing the extension back into the nozzle.