Table of Contents
Advertisement
Quick Links
KNOW YOUR PRODUCT
AIR MOVER
• HIGH AIR DELIVERY OF 1150 CFM
• EFFICIENT 300W MOTOR
• 2 SPEED AIRFLOW FOR VARIOUS
APPLICATIONS
INSTRUCTION MANUAL
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
0519
Advertisement
Table of Contents
Related Manuals for Full Boar FBAM-1150
Summary of Contents for Full Boar FBAM-1150
- Page 1 KNOW YOUR PRODUCT AIR MOVER • HIGH AIR DELIVERY OF 1150 CFM • EFFICIENT 300W MOTOR • 2 SPEED AIRFLOW FOR VARIOUS APPLICATIONS INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
-
Page 2: Specifications
SPECIFICATIONS - MODEL NO. FBAM-1150 Power: 300W Input: 220-240V ~ 50Hz Airflow (max.): 1150 cfm No load speeds: 820 ±50/min (low speed #1) 950 ±50/min (high speed #2) Fan diameter: 245 mm Positions: 0°, 45°, 90° Gross weight: 11 kg KNOW YOUR PRODUCT 1. -
Page 3: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS............Page 02 KNOW YOUR PRODUCT........... Page 02 INTRODUCTION............Page 04 SAFETY INSTRUCTIONS........... Page 04 SET-UP & PREPARATION........... Page 08 CONTROLS..............Page 09 MAINTENANCE............Page 10 STORAGE..............Page 10 DESCRIPTION OF SYMBOLS........Page 11 CONTENTS..............Page 11 WARRANTY.............. -
Page 4: Introduction
INTRODUCTION Congratulations on purchasing a Full Boar Air Mover. Your Full Boar Air Mover FBAM-1150 is designed for circulating air for cooling, ventilation, extracting and drying in open or confined spaces. Ideal for drying and ventilating fumes from wet, damp and flooded surfaces such as carpets, finished floors, painted areas and adhesives. - Page 5 GENERAL SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery operated (cordless) power tool.
- Page 6 GENERAL SAFETY INSTRUCTIONS 4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b.
- Page 7 AIR MOVER SAFETY WARNINGS WARNING! This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Page 8: Set-Up & Preparation
SET-UP & PREPARATION WARNING! Ensure the tool has been switched off and disconnected from the power supply performing any of the following operations. Operating positions The air mover may be set in one of three operating positions. Select the position best suited for your application. -
Page 9: Controls
CONTROLS WARNING! The power supply for this product should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock. Speed adjustment knob (6) (Fig. 4) 1. To start the air mover turn the speed adjustment knob (6) to position “1”... -
Page 10: Maintenance
MAINTENANCE WARNING! Ensure the tool has been switched off and disconnected from the power supply performing any maintenance or cleaning. • Keep the air intakes (5) of the air mover clean at all times. • To keep the air mover clean, the outer housing (4) may be cleaned with a soft, damp cloth. A mild detergent can be used if necessary. -
Page 11: Description Of Symbols
DESCRIPTION OF SYMBOLS Volts Hertz Alternating current Watts Revolutions or No load speed reciprocation per minute Millimetres Diameter Regulator compliance mark Cubic Feet per Minute Read instruction manual Warning This fan is suitable for use in tropical climates CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. -
Page 12: Warranty
WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE (see www.bunnings.com.au or www.bunnings.co.nz for store locations) WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia 1800 069 486 New Zealand 0508 069 486...
Need help?
Do you have a question about the FBAM-1150 and is the answer not in the manual?
Questions and answers