POSITION B. Then If your YEMA watch is equipped with a date, pull the crown to simply turn it anti-clockwise until the desired date appears in the window. IMPORTANT: Do not make date adjustments when the time on the watch reads between the hours of 8:00pm and 2:00am.
POSITION C TIME SETTING In order to adjust the time, pull out the crown to the last notch. Then turn it in either direction until the hands indicate the correct time. If the crown is pulled to POSITION C while the chronograph is started, the chronograph hands will continue to move.
Page 7
PUSHER A START/STOP CHRONOGRAPH PUSHER A Press to start the chronograph. The chronograph hands will start moving. PUSHER A Press again to stop the chronograph. The chronograph hands stop to indicate the elapsed time. The center chronograph second hand displays the elapsed seconds while the 9 O’clock sub-register shows the elapsed minutes (maximum 30 minutes) PUSHER B...
Page 9
YEMA: • Ensure that the crown is perfectly screwed down after winding up the movement and/or setting the time and the date. Once the crown is fully screwed down against the case, your YEMA watch is guaranteed waterproof.
Need help?
Do you have a question about the SPEEDGRAF and is the answer not in the manual?
Questions and answers