Related Manuals for MD SPORTS 1625802
Summary of Contents for MD SPORTS 1625802
- Page 1 MODEL: 1625802 VM Innovations ASSEMBLY INSTRUCTIONS ATTENTION DO NOT RETURN TO THE STORE Contact MD Sports Customer Service * For additional resources and Frequently Ask Questions, please visit us at themdsports.com...
- Page 2 3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before putting together, all damaged table tops/playing surfaces need to be returned to the store. Please contact with retailer for their return policy. 1625802 (Continued on the next page.) www.themdsports.com...
-
Page 3: Tools Required
WARNING: Adult Assembly Required. WARNING: No Children in Keep away from pets Do not use or keep product Strong Adults Needed outdoors. For indoor use only. Assembly Area No wet/humid conditions. 1625802 www.themdsports.com (Continued on the next page.) - Page 4 1625802 PARTS LIST Side Apron End Apron Playfield Right Leg Outside Left Leg Support Brace Leg Leveler Ball Cup Ball Return Goal Box Inside Ball Cup Ball Catcher Channel Player - Red/Black Player - Blue/Black 5-Hole Rod 3-Hole Rod 2-Hole Rod...
- Page 5 1625802 PARTS LIST 4 x 12mm Soccer Ball Stop Ring Allen Key Screw 4 x 25mm Round Triangle Board Top Slat Board Plastic “L” Bracket Head Screw Triangle Board M6 Spring M6 Washer Lock Washer 1625802 PRE-INSTALLED PARTS Top corner...
- Page 6 Note: Do not tighten the screws at this step. FIG. 3 X 16 FIG.3 5. Attach the Playfield (#3), with the graphics facing down, on the Side and End Aprons (#1 & #2) using Sixteen Screws (#25). See FIG. 3. 1625802 www.themdsports.com (Continued on the next page.)
- Page 7 10. Attach the Support Braces (#6) to the Side Aprons (#1) using four Screws (#28) per support brace. Attach the Support Braces (#6) to the Playfield (#3) using two Screws (#28) per support brace. See FIG. 5B. 11. Screw the Leg Levelers (#7) into the bottom of each leg. 1625802 www.themdsports.com (Continued on the next page.)
- Page 8 15. Lift the table assembly from the floor with two strong adults, turn it over, and set table on its legs in the location where you play. Go back and make sure that all connections are tight. 1625802 www.themdsports.com (Continued on the next page.)
- Page 9 17. Attach the Triangle Board (#37) on to playfield (#3) using one screw (#33) per triangle board. Cover the screw by inserting triangle board cap (#41) into the Triangle Board (#37) See FIG. 7 & 7B. 1625802 www.themdsports.com (Continued on the next page.)
- Page 10 Note: The goalie should be at the left side of each player. See FIG.8C. 22. Attach the Stop Rings (#35) to the Rods (#16) using one Bolt (#29) and one Nut (#30) per Stop Ring. 1625802 www.themdsports.com (Continued on the next page.)
- Page 11 Rods. 24. Attach the Scorer Holders (#21) to the End Aprons (#2) using one Screw (#31) per Scorer Holder. Then Place the Scorers (#20) on the Scorer Holders. YOU ARE NOW READY TO PLAY! 1625802 www.themdsports.com (The last page)