Table of Contents
Advertisement
2
3
FIRST USE
1. Remove the exterior and interior packaging. Check that ice basket and ice
scoop is included. If any parts are missing, please contact our customer ser-
vice.
2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket
and clean it
3. Find a location for your ice maker that is protected from direct sunlight and
other sources of heat (e.g: stove, furnace, radiator). Place the ice maker on a
level surface. Make sure that there is at least 10cm of space between the back
and sides of your ice maker and the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging ice maker in.
5. The appliance must be positioned so that the plug is accessible.
6. Check out the drain plug at the back and ensure it is secured, or all the water
will leak out!
7. First batch of ice cubes may be slightly smaller. This is normal as machine
builds up to optimum performance temperatures
4
SIM100_IM.indd 4
PARTS
1. Lid
2. Control Panel:
3. Water drain cap (at back): For drain-
ing water from water reservoir.
1
CONTROL PANEL
A
B
C
D
A. Power button
B. Size selector
C. Size indicator
D. Ice full indicator
E. Add water indicator
E
14/07/2016 10:21
Advertisement
Table of Contents
