Gm Multi-Timbre Mode; Performance Memory Data Send - Yamaha Clavinova CVP-49 Owner's Manual

34
MIDI Functions

GM Multi-Timbre Mode

The GM Multi-Timbre mode is a special mode in which the Clavinova voices can be independently controlled on
different MIDI channel numbers (1 through 16) by an external MIDI device. Also, MIDI program change numbers re-
ceived on all channels are converted to GM system level 1 voice allocation numbers. With the GM Multi-Timbre mode
switched on, you can select any voice from numbers 1 to 128 which are set to the GM voice allocation.
The GM Multi-Timbre mode can be activated as follows:
DRUMS
= GM Multi-Timbre mode ON.
DRUMS
= GM Multi-Timbre mode OFF.

Performance Memory Data Send

This function is used to transmit all data stored in the Performance Memory to a MIDI data storage device such as
the Yamaha DOU-10 Disk Orchestra Unit. When Performance Memory data is being transmitted, "Snd" will appear on
the display.
MIDI/
TRANSPOSE
Z
Hold [MIDI/TRANSPOSE] and press [DRUMS].
X
Release [MIDI/TRANSPOSE].
NOTES
Z
VOICE 13-60
Hold [MIDI/TRANSPOSE] and press [VOICE 13-60]. Transmission will begin.
X
Release the buttons.
• The GM Multi-Timbre mode is automatically turned on if the Clavinova receives a
GM on message from an external MIDI device.