Adding New Tracks - Yamaha Clavinova CVP-49 Owner's Manual

26
Performance Memory
The following parameters will be recorded in addition to notes you play:
Parameters recorded for Each Track
• Voice*
• Dual Voice*
• Split Voice*
• Volume* (Not changeable
during recording)
• Pan*
• Damper Pedal*
• Soft Pedal*
B
Stop Recording .......................................................................................................................................
START/STOP

Adding New Tracks

When you've finished recording the first track, you can simply play it back as described in the previous section or
add a new track to your song. To record a new track:
Z
Select a Voice .........................................................................................................................................
X
Engage the Record Ready Mode ...........................................................................................................
1 2
START/STOP REC
C
Select a Track .........................................................................................................................................
V
Start Recording .......................................................................................................................................
B
Stop Recording .......................................................................................................................................
Parameters Recorded for the Entire Song
• Sostenuto Pedal (Not • Style
recorded as an initial
• Rhythm Volume*
setting)
• Reverb Type*
• Reverb Depth* (Not • Reverb Depth*
recorded as an initial • Tempo*
setting)
• Intro Mode (Not changeable
• Dual Balance* during recording)
• Split Balance* • Ending Mode (Not recorded
as an initial setting)
• Fill-in
Press the [REC] button a second time, or the [START/STOP] button to stop
REC
recording.
Select a voice and other parameters for the new track. Try out the voice and
selected parameters before proceeding.
Press the [REC] button to engage the record ready mode.
ABC RHYTHM
Monitoring Previously Recorded Tracks
You can turn the playback of all previously recorded tracks on or off as required
by pressing the corresponding track button(s) before pressing the [REC] button.
Select a track other than the one you used to record the previous track. The red
indicator of the track selected for recording should light.
NOTES
Play on the keyboard or press the [START/STOP] button to start recording.
Press the [START/STOP] button or the [REC] button to stop recording.
Changing the Initial Parameter Values
The initial values of parameters marked with asterisks (*) in the lists given
above can be changed for each track or the entire song by engaging the record
mode for the desired track, changing the parameters as required, and then disen-
gaging the record mode (press the [REC] button again) without actually record-
ing. To cancel any initial parameter values you've made, select a different track
and then press the [REC] button to disengage the record mode.
To change individual ABC part volume settings engage any ABC mode after
turning [REC] on, set the RHYTHM, CHORD 1, CHORD 2, and/or BASS
volume control as required, then disengage the record mode.
• ABC Mode (Not change-
able during recording)
• ABC Volume*
• Solo Styleplay Mode (Not
changeable during record-
ing)
• Solo Styleplay Variation
(Not changeable during
recording)
• Remember that if you record on a track that has already been recorded, the
previous material will be erased and the new material will be recorded in its place.
Parameters Recorded for Each
Track via MIDI Only
• Pitch Bend Sensitivity (Not recorded as
an initial setting)
• Coarse Tune (Not recorded as an
initial setting)
• Fine Tune (Not recorded as an initial
setting)