Advertisement
For 4 way cassette
7. Close the electrical component box cover and tighten the screws.
8. Attach and close the front grille.
M ake sure the hooks on the rear side of grille fits properly into the
grooves on panel (
9. Check out that the panel is fixed to the indoor unit.
F ix screws tightly between the panel and the surface of the ceiling.
If the panel is installed incorrectly, air may leak.
Do not block any discharge vents in the panel.
• I f the angle on the air flow blades has been changed by user due to opening the front grille for installation or
maintenance, you must turn off the circuit breaker and turn it on again before using the air conditioner.
NOTE
Otherwise, angles of the each angle can be different or some of the blade may not close when the product is off.
4
Panel Global 4way_IM_E 32728-1.indd 4
) and then push the panel to close (
).
Hook
Grille
2010-11-04 오전 11:16:17
Advertisement
