Before Using The Cp33; Power Supply Connections - Yamaha CP 33 Owner's Manual

Before Using the CP33

Before Using the CP33

Power Supply Connections

1
Make sure that the instrument's [STANDBY/ON] switch on the rear panel is at the
STANDBY position.
2
Connect the supplied PA-3C power adaptor's DC cable to the DC IN jack (page 14) on
the instrument's rear panel.
3
Connect the other end of the power cord to an AC outlet. Make sure your CP33 meets
the voltage requirement for the country or region in which it is being used.
WARNING
Use ONLY a Yamaha PA-3C AC Power Adaptor (or other adaptor specifically recommended by Yamaha) to power your
instrument from the AC mains. The use of other adaptors may result in irreparable damage to both the adaptor and the
CP33.
CAUTION
Unplug the AC Power Adaptor when not using the CP33, or during electrical storms.
8
CP33 Owner's Manual
HONES STANDBY
ON
USB FOOT PEDAL
SUSTAIN AUX
DC-IN
OUTPUT PHONES STANDBY
ON
R L/MONO
MIDI USB FOOT PEDAL
IN OUT SUSTAIN AUX