Yamaha Clavinova CLP-295GP Owner's Manual page 80

Yamaha clavinova owner's manual
Table of Contents

Advertisement

Detailed settings for the voices [VOICE SETTING]
Setting the chorus on/off
[ChorusOnOff]
You can set the [CHORUS] button on or off for
each voice. When you select a voice, the chorus on/
off setting for the voice automatically changes
according to this parameter.
TIP
Even if this parameter is turned on, the chorus effect is dis-
abled if the ChorusSend parameter is set to 0.
See the procedure on page 71.
A
Main
ChorusOnOff
C
Setting range:
On/Off
Selecting the DSP type*
[DSP Type (DSP)]
You can select other effects (than reverb and cho-
rus).
See the procedure on page 71.
A
Main
DSP Type
C
Setting range:
DelayLCR
DelayLR
Echo
CrossDelay
Symphonic
Rotary
Tremolo
VibeRotor
AutoPan
Phaser
AutoWah
80
CLP-295GP Owner's Manual
Set?-->
NO
Off
Set?-->
NO
DelayLCR
Delay applied at left, center, and
right positions.
Delay applied at left and right posi-
tions.
Echo-like delay
Left and right delays are crossed.
Adds a rich and deep acoustic effect.
Adds the vibrato effect of a rotary
speaker.
The volume level changes in rapid
cycles.
The vibrato effect of a vibraphone.
The sound pans left to right and
back and forth.
The phase changes periodically,
swelling the sound.
The center frequency of the wah fil-
ter changes periodically.
SoundBoard
Off
Setting the speed of the vibraphone
vibrato effect* [VibeRotorSpeed]
TERMINOLOGY
Rotor= The rotating portion of an electrical device etc.
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
This sets the speed of the vibrato effect that is
B
applied when you have selected Vibraphone and
YES
are using the VibeRotor pedal.
See the procedure on page 71.
D
A
C
Setting range:
1 - 10
Turning the vibraphone vibrato effect
on/off*
[VibeRotorOnOff (RotorOnOff)]
B
YES
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
D
It turns on/off the vibrato effect that is applied
when you use the VibeRotor pedal.
See the procedure on page 71.
A
C
Setting range:
On/Off
Simulates the reverberation of a
piano soundboard.
No effect.
Main
Set?-->
VibeRotorSpeed
6
Main
Set?-->
VibeRotorOnOff
On
B
NO
YES
D
B
NO
YES
D

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents