Advertisement

Introduction

Thank you for purchasing the new TAS-1 Temporary Audio System from AtlasIED. This speaker/microphone system is designed to provide
high intelligibility and coverage in applications including temporary medical facilities, DJ, house of worship, public speaking, schools, and
other applications where fixed installation is not a requirement.
This system has been configured for a fast, tool free installation that can be set up and working in a few minutes.

Contents

SMA-12
SMP-12
(1) SMA-12 Powered 12" 2way speaker
(1) SMP-12 Passive 12" 2way speaker
TAS-1
Install Manual
(1) M300-HH handheld microphone with
mic stand, cable, and carrying bag
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
(2) SS500E Speaker stands
AtlasIED.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TAS-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for AtlasIED TAS-1

  • Page 1 Install Manual Introduction Thank you for purchasing the new TAS-1 Temporary Audio System from AtlasIED. This speaker/microphone system is designed to provide high intelligibility and coverage in applications including temporary medical facilities, DJ, house of worship, public speaking, schools, and other applications where fixed installation is not a requirement.
  • Page 2 Figure 1 NOTE: In windy areas AtlasIED strongly recommends placing sandbags on the legs of the stand. (Supplied by others) 1. Loosen the leg clamp knob and slide the clamp down the pole to extend the legs to their maximum extent.

Table of Contents