Panasonic CF-C1 Series Addendum

Model No. CF-C1 Series
This addendum includes revisions to the Operating Instructions and Reference Manual, as well as
supplementary information.
<Only for model with touchscreen>
About the title of the Reference Manual
Read the title in the Reference Manual given in the Operating Instructions as follows.
Title given in the Operating Instructions
"Digitizer / Multi Touch Operation"
Introduction
Replace "digitizer pen" with "stylus".
Description of Parts
• Replace "digitizer pen" with "stylus".
• B: LCD/Digitizer
Replace "LCD/Digitizer" with "LCD/Touchscreen".
First-time Operation
 Preparation
The following accessory is NOT supplied.
• Digitizer Pen . . . . . . . . . . . . . . . . . 1
The following accessory is supplied.
• Stylus . . . . . . . . . . . . . . . . . . . . . . 1
Model No: CF-VNP017AU
 Step 6: Perform the screen calibration
Replace the procedure with the following.
NOTE
• Perform the following calibration for each user.
• Rotate the display to primary landscape before performing the calibration.
A Click (start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
B Click [Calibrate].
C If [User Account Control] is displayed, click [Yes].
D Using the stylus, touch each of the "+" target marks one by one, and then click [Yes].
A Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings].
B Set the following with [Calibrate] in [Settings].
C Using the stylus, touch each of the "+" target marks one by one, and then click [Yes].
Handling and Maintenance
 When using the digitizer
Replace "digitizer" with "touchscreen".
Replace "digitizer pen" with "stylus".
Printed in Japan
Addendum
Title given in the Reference Manual
"Screen Input Operation"
Attached in the pen holder at purchase.
Reference Manual "Screen Input Operation" )
(
FJ0810-0
DFQX1C17ZA