Table of Contents
Advertisement
The technical data specified for the hazardous area comply with the values certified in the
European EEx approval. The user bears the sole responsibility of examining the equipment
with regard to its suitability for the intended application and environmental conditions. E.L.B.
Ex-Geräte GmbH accepts no liability for any lack of suitability.
For the installation, maintenance and cleaning of the units, it is absolutely necessary to
observe the applicable ordinances and provisions concerned with explosion protection (VDE
0160, VDE 0165 or EN 60079-14, EN 50014 - 50039) as well as the Accident Prevention
Regulations (UVV).
8
Liability
The technical data specified for the hazardous area comply with the values certified in the
European EEx approval. The user bears the sole responsibility of examining the equipment
with regard to its suitability for the intended application and environmental conditions. E.L.B.
Ex-Geräte GmbH accepts no liability for any lack of suitability.
10
EC Declaration of Conformity
We hereby confirm the conformity of the equipment listed below with the directives of the
Council of the European Community. The safety and installation instructions of the product
documentation must be observed.
Model:
Directive:
European Standard:
Directive:
European Standard:
*) including amendments
E.L.B. Ex-Geräte GmbH
An der Hartbrücke 8
D-64625 Bensheim
Int. + 49 - 6251 -63736 Tel.
Int. + 49 - 6251 -63729 Fax
elb@elb.de
www.elb.de
01.02.2005
EEx-i Torch ELBLite 28 - Technical Documentation
ELBLite 28
EMC Directive 98/336/EWG)*
EN 50081-1, 3/93*)
EN 50081-2, 3/93*)
EN 50082-1, 2/96*)
EN 50082-2, 2/96*)
Low voltage Directive 73/23/EWG*)
EN 61010-1, 3/94*)
EN 50014: February 2000*)
EN 50020: 1994*)
© E.L.B. Ex-Geräte Bachmann GmbH
page 5
Advertisement
Table of Contents
