Advertisement
Quick Links
Congratulations on your purchase of the Utility Ladder Hardware Kit! These instructions will guide you
through the process of building a 7-step (8 foot) ladder. Familiarity with the instructions will make the
process easier to understand and more enjoyable.
Utility Ladder
Assembly Instructions
Advertisement
Related Manuals for Rockler GRP32636 2
Summary of Contents for Rockler GRP32636 2
- Page 1 Utility Ladder Assembly Instructions Congratulations on your purchase of the Utility Ladder Hardware Kit! These instructions will guide you through the process of building a 7-step (8 foot) ladder. Familiarity with the instructions will make the process easier to understand and more enjoyable.
- Page 2 ⁄ " ⁄ " 32° ⁄ " ⁄ " 12° ⁄ " 9" 3/4" ⁄ " Diameter ⁄ " 3/8" Diameter Rail End View 3/4" Bullnose 3/4" stock flat cut 3/4" ⁄ " ⁄ " ⁄ " ⁄ " 102° ⁄...
- Page 3 ⁄ " ⁄ " Diameter 3/4" Diameter ⁄ " 7/8" 7 Step (8 Foot) Ladder Plan 1. Cut Ladder Rails (1 and 2) to size and shape edges to a 3/4" radius bullnose. 2. Drill 3/8" holes according to plan for mounting the Stamped Steel Steps (4).
- Page 4 Attention Rockler Plan User Before starting, please read the plan completely. Check Rockler.com for updates that may not be included on this copy. If you have further questions, please contact our Technical Support Department, 1-800-260-9663 or support@rockler.com...
Need help?
Do you have a question about the GRP32636 2 and is the answer not in the manual?
Questions and answers