Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for QEI 6PTM2 Series
- Page 1 UG-1011 6PTM2 PERIPHERAL TRANSFER MODULE USER'S GUIDE November 2018...
- Page 2 QEI does not assume liability arising to the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
- Page 3 UG -1011 6PTM2 PERIPHERAL TRANSFER MODULE USER'S GUIDE Revisions Revision Description Date Release to Production December 1995 Formatting Update March 2003 Added Expansion Instructions May 2007 Formatting Update September 2012 Updated QEI Address November 2018 Copyright © 2016 QEI Revisions...
-
Page 5: Table Of Contents
POWER INPUT ..............5 RS-232 PORTS ..............5 7 TYPICAL APPLICATION ............6 8 EXPANDING AN EXISTING PTP ASSEMBLY ......6 9 6PTM2 FINAL ASSEMBLY ............7 10 6PTM2-1 ELECTRICAL ASSEMBLY ........8 11 6PTM2-2 ELECTRICAL ASSEMBLY ........8 Copyright © 2016 QEI Contents... -
Page 7: Description
(garbage bits, or byte), followed by a delay time (no data) equal to the RTS delay required by the modem or radio system being controlled, followed by the actual data. Copyright © 2016 QEI DESCRIPTION... -
Page 8: Jumpers And Adjustments
Rs-232 Voltage Level Dry Contact, Optional RTS TIME DURATION Externally Generated: Controlled by inputs to the A or B Ports. Internally Generated: Adjustable, up to 1000 msec. INDICATORS LED Power ON Indication JUMPERS AND ADJUSTMENTS: Copyright © 2016 QEI... -
Page 9: Field Connections
The assembly Model Designation is a generic alpha-numeric sequence of characters specifying configuration options, and is in the form shown below: 6PTM2-A/ModXX Modification No. 01-099 (special option) Model Optional A = Designation PTT Relay Copyright © 2016 QEI ORDERING INFORMATION... -
Page 10: Connectors
= XDN Transmit Signal Output J1-4 = Common (0 Volts) J1-5 = Common (0 Volts) J1-6 = RDN Receive Signal Input J1-7 = p/o PTT Relay Contact (Optional) J1-8 = p/o PTT Relay Contact (Optional) CONNECTORS Copyright © 2016 QEI... -
Page 11: Interconnection Cables
NOTES: /XX Indicates cable length option, in feet. * An RJ45-DB25, or –DB9, converter may be required. ** Depending on the type of peripheral device, one of these converters, properly configured, may be required. Copyright © 2016 QEI INTERCONNECTION CABLES... -
Page 12: Typical Application
Insert the 12VDC power plugs of the expander cable in to the last existing PT Module and all the newly added PT Modules. 3. Make the required RS232 port connections via the RJ-45 jacks to their associated peripheral devices. TYPICAL APPLICATION Copyright © 2016 QEI... -
Page 13: 6Ptm2 Final Assembly
UG-1011 6PTM2 PERIPHERAL TRANSFER MODULE USER'S GUIDE 6PTM2 FINAL ASSEMBLY Copyright © 2016 QEI 6PTM2 FINAL ASSEMBLY... -
Page 14: 10 6Ptm2-1 Electrical Assembly
6PTM2 PERIPHERAL TRANSFER MODULE USER'S GUIDE UG-1011 10 6PTM2-1 ELECTRICAL ASSEMBLY 11 6PTM2-2 ELECTRICAL ASSEMBLY 6PTM2-1 ELECTRICAL ASSEMBLY Copyright © 2016 QEI...