BaltLED TANAGER Installation Manual

TANAGER LUMINAIRE

INSIDE THE BOX:

Surface Mounting
NEEDED FOR MOUNTING:
L, mm
310 / 560 / 1060 / 1560

WARNING

! Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
• Perform installation in dry location only.
• Luminaire may fall down if not installed properly.
• Avoid direct eye exposure to the light source while it is on.
• For indoor use only.
• Do not operate luminaire with damaged parts.
• To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
© 2019, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
1 /
www.baltled.com
8
th
8 November, 2019
INSTALLATION GUIDE
Cable Mounting
W, mm H, mm
145.5 81 / 138* /131.5**
• The manufacturer shall not be liable for any damage
If you have any questions, contact the manufacturer.
3-Phase Track Mounting
* With 3-phase track mounting
** With cable mounting
resulting from inappropriate modifications to the
luminaire or faulty installation.