Accessories; Troubleshooting - Ryobi PMC3812K Operator's Manual

To order these accessories, call 1-800-525-2579.
 Brass Nozzle ........................................................................................................................................ Model No. PMC080
 Misting Tube ............................................................................................................Model No. PMC3824T or PMC3820T
 3/8 in. Booster Pump ........................................................................................................................... Model No. MBP160
 Inline Misting Filter ............................................................................................................................. Model No. PMCF009
 Nozzle Cleaner .................................................................................................................................. Model No. PMCC008
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
PROBLEM
Leak at nozzle, threaded hole, or
connection
Misting kit will not spray
Loss of pressure
Water stuck in misting tube assembly
after use
NOTE: ILLUSTRATIONS START ON PAGE 8 AFTER FRENCH

ACCESSORIES

TROUBLESHOOTING

POSSIBLE CAUSE
Nozzles were installed improperly.
Nozzles clogged or dirty.
Misting tubes connected improperly.
Hose faucet is off.
T-filter is clogged.
Nozzles clogged or dirty.
T-filter is clogged.
Debris in misting kit.
Leak in misting tube.
Misting tube assembly connected to
T-filter.
Defective drain valve.
AND SPANISH LANGUAGE SECTIONS.
7 — English
SOLUTION
Reinstall nozzles and tighten securely.
Clean nozzles.
Reconnect misting tubes.
Turn hose faucet completely on.
Follow instructions for cleaning strainer
in Maintenance.
Clean nozzles.
Follow instructions for cleaning strainer
in Maintenance.
Follow instructions for flushing the
system in Assembly.
Locate and replace leaking misting
tube.
Disconnect misting tube assembly
from T-filter and allow water to drain.
Replace drain valve.