Bulk Data Send; Receiving Bulk Data - Yamaha yahama PSR - 520 Owner's Manual

Bulk Data Send

...............................................................................................................................................
This function causes the contents of the registration, song and multi pad
data to be transmitted via the MIDI OUT connector. This data can be saved
to memory or disk via a MIDI sequence recorder or MIDI data recorder, and
then reloaded when required. The bulk data can also be sent directly to a
second PSR-520.
To send the bulk data select the "BulkSnd?" function, then press the
[+/YES] button. "Sure?" will appear on the display. Press [+/YES] again to
begin transmission of the bulk data. "BkSnd:Sg" (song data), "BkSnd:Pd"
(multi pad data) and then "BkSnd:Rg" (registration data) will appear on the
display during transmission. When the data has been transmitted, "End" will
appear momentarily on the display and return to the "BulkSnd?".
YES

Receiving Bulk Data

The PSR-520 will automatically receive compatible bulk data from an
external MIDI device as long as no style playback or song recording/play-
back operation is in progress. "BkRcv:Sg" (song data), "BkRcv:Pd" (multi
pad data) and then "BkRcv:Rg" (registration data) will appear on the dis-
play during reception. When the data has been received, "End" will appear
momentarily on the display and return to the previously selected display.
001
Overall Functions
• A bulk dump transmission can be
stopped at any time by pressing
the [–/NO] button.
• No other operations can be
performed during bulk dump
transmission.
• No other operations can be
performed during bulk dump
reception.
• If an error occurs during bulk
data reception, "BkRcvErr" and
then "MemClrSg", "MemClrPd"
or "MemClrRg" will appear on
the display indicating that any
of the song, multi pad, registra-
tion memory data has been
cleared.
• When a bulk dump is received,
the received data replaces any
data that was previously in the
PSR-520 memory.
75