Setting The Reverb Return Level - Yamaha yahama PSR - 520 Owner's Manual

2
Select the Reverb Type
Use the cursor [>] button to enter the Reverb Type function and then
select one of the 13 reverb types using the [–/NO] and [+/YES] buttons, the
number buttons or the data dial. The name of the selected reverb type ap-
pears on the top line of the display.
FUNCTION
CURSOR
You can also enter the Reverb Type function by pressing and holding the
[REVERB] button until the arrow jumps to the "DIGITAL EFFECT" posi-
tion and the current reverb type name appears in the display.
3
Exit
.........................................................................................................................................................................................
Press the [VOICE] button or select a different function to exit from the
DIGITAL EFFECT function.
The reverb return level determines the amount of "wet" (affected) signals output to the amplifier.
1
Select the Reverb Return Level Function
Press the [FUNCTION] button to the left of the display as many times
as necessary until the arrowhead in the display appears next to "DIGITAL
EFFECT" in the function list to the left of the display, and use the cursor
[ ] and [ ] buttons to select the Reverb Return Level function.
2
Set the Reverb Return Level
Use the [–/NO] and [+/YES] buttons, the number buttons or the data dial
to set the desired reverb return level. The range is from "00" to "127".
3
Exit
.........................................................................................................................................................................................
Press the [VOICE] button or select a different function to exit from the
DIGITAL EFFECT function.
...................................................................................................................
VOICE 101
STYLE
SONG
REGIST MEMORY
MULTI PAD
DUAL VOICE
SPLIT VOICE
HARM/ECHO
OVERALL
DIGITAL EFFECT

Setting the Reverb Return Level

164
................................................................................................
• See page 79 for a complete
• The reverb type can be reset to
• You can return to the previous
• The Reverb type will change
• If you want to disable the reverb
The Reverb Types
..................................................
• See page 78 for more details on
• The reverb return level desig-
• The default reverb return level =
Digital Effects
listing of the reverb types.
its default by simultaneously
pressing the [–/NO] and [+/YES]
buttons.
display, "Reverb m ", by pressing
the cursor [ < ] button, and
choose the CHORUS or DSP
effect.
automatically whenever a differ-
ent style is selected.
effect for all the data excepting
VOICE function voice, select
OFF in the Type selection.
01~04 Hall 1~4
05~08 Room 1~4
09, 10 Stage 1, 2
11, 12 Plate 1, 2
13 OFF
the Digital Effects.
nated here affects the entire
setting, while the reverb send
level can be applied to the voice
selected via the VOICE function,
the split voice and the dual voice
separately via the "RevLevel" in
the OVERALL function group, the
"S.RevLvl" in the SPLIT VOICE
function and the "D.RevLvl" in the
DUAL VOICE function (see
pages 68, 16 and 19).
64 can be recalled instantly by
pressing both the [–/NO] and [+/
YES] buttons simultaneously.
25