Table of Contents
Advertisement
Mounting Dimensions (unit = mm)
Side View
80.2
Rear View
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the back
panel of the NI MES-3980 when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate, make sure the stiff metal spring is
situated towards the top, as shown in the following figure.
STEP 1:
Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
metal
spring
DIN-Rail
To remove the NI MES-3980 from the DIN-Rail, simply reverse Steps 1 and 2.
30.00
9.00
105.00
7.5
DlN-Rail
DlN-Rail Kit
55
7.5
DlN-Rail Kit
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown.
— 3 —
15.0
51.3
Front View
6
10
10
5
7.75
7.75
30.50
13.9
18.2
Wall Mounting Kit
metal
spring
DIN-Rail
13.9
3.5
6
13.9
Advertisement
Table of Contents
