Description; Product Unboxed; Dimensions; Lock - BQT YD25K Installation And Operating Instructions Manual

1. DESCRIPTION

The YD25K is a solenoid operated dead bolting lock with manual key override suited for commercial or residential
doors. In fail secure mode, the use of electronic access control can be bypassed completely for a traditional lock and
key. It is supplied with a matching strike plate and can be surface mounted with the aid of accessories or installed
into a mortise for a concealed solution.
Integrated electronics provide complete control over the lock and offer an array of features;

Multi–voltage input (12-24VDC)

Multiple locking / unlocking attempts

Adjustable timed re-lock

Current reduction circuitry

Door position and bolt position monitors
 High physical strength – 10,000N

2. PRODUCT UNBOXED

The YD25K is supplied with four 10G x 1" csk self-tapping
screws for fitting the lock and strike plate. They are
suitable for mounting in both aluminium and wooden doors
and frames. Also included are eight M5 x 10 Machine
Screws. The YD25K is also supplied with an M5 x 30 csk
screw for the key cylinder.
The mounting holes in the lock face plate and strike plate
are ø 5.2mm so any 10G or 5mm screw can be used.

3. DIMENSIONS

The dimensions shown (in millimetres) are approximate and are subject to change without prior notice.

3.1. Lock

Page 4
Key Cylinder Screw Mounting Screws Lock Strike Plate