Engine Compartment Fuse Replacement - Kia Niro Owner's Manual

Hide thumbs Also See for Niro:
Table of Contents

Advertisement

CAUTION
• Put all switches in ON when
driving.
• If the vehicle remains idle for
over 1 month, put all switches
in OFF to prevent the batteries
from being discharged.
• Excluding long-term parking
for over 1 month, the contact
points of switches may wear
out
upon
extensive
Please refrain from excessive
use of switches.
Engine compartment fuse
replacement
use.
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up. When the blade type
fuse is disconnected, remove it by
using the clip designed for chang-
ing fuses located in the engine
room fuse box. Upon removal,
securely insert reserve fuse of
equal quantity.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, we rec-
ommend that you consult an
authorized Kia dealer.
CAUTION
After checking the fuse panel in
the engine compartment, secure-
ly install the fuse panel. If not,
ODE076021
cover through the audible click-
ing sound. Electrical failures may
occur from water contact.
Maintenance
8 65

Advertisement

Table of Contents
loading

Table of Contents