Air Cleaner Filter; Spark Plugs; Cooling System; Coolant (Engine / Inverter) - Kia Niro Owner's Manual

Maintenance
Vacuum crankcase ventilation
hoses (if equipped)
Inspect the surface of hoses for evi-
dence of heat and/or mechanical
damage. Hard and brittle rubber,
cracking, tears, cuts, abrasions, and
excessive swelling indicate deterio-
ration. Particular attention should be
paid to examine those hose surfaces
nearest to high heat sources, such
as the exhaust manifold.
Inspect the hose routing to assure
that the hoses do not come in con-
tact with any heat source, sharp
edges or moving component which
might cause heat damage
mechanical wear. Inspect all hose
connections, such as clamps and
couplings, to make sure they are
secure, and that no leaks are pres-
ent. Hoses should be replaced
immediately if there is any evidence
of deterioration or damage.
8 24

Air cleaner filter

We recommend that the air cleaner
filter be replaced by an authorized
Kia dealer.

Spark plugs

Make sure to install new spark plugs
of the correct heat range.
WARNING
Do not disconnect and inspect
spark plugs when the engine is
hot. You may burn yourself.
or

Cooling system

Check the cooling system compo-
nents, such as the radiator, coolant
reservoir, hoses and connections for
leakage and damage. Replace any
damaged parts.

Coolant (Engine / Inverter)

The coolant should be changed at
the intervals specified in the mainte-
nance schedule.

Dual clutch transmission fluid

Inspect the dual clutch transmission
fluid according to the maintenance
schedule.