Advertisement
Quick Links
Advertisement
Related Manuals for Flipper Two-Device Universal
Summary of Contents for Flipper Two-Device Universal
- Page 1 USER MANUAL...
- Page 2 Power Mute TV Channel down Channel up Volume down Volume up TV button Delete button STB button Add button...
- Page 3 Online: FlipperRemote.com/Support Email: Support@FlipperRemote.com Telephone support also available online. Start with your devices ON. Slide down the bottom half of Flipper to reveal the 0-9 and setup buttons. See code list for codes listed by Brand of your device. Common Codes (see code list for others, and updates online, FlipperRemote.com/Support click on Codes:...
-
Page 4: Table Of Contents
INDEX Flipper can work with a TV Only or a STB (STB is set top box = cable box). Flipper has three set up methods: Code Entry, Code Search and Learning. Code Entry: TV Only ............ 4 b. TV and STB ..........5 Soundbars .......... -
Page 5: Tv Only
/ Delete channels (or something similar according to your TV interface), set your list accordingly; Set Favs in Flipper: Press and hold TV and ADD at same time till solid, enter channels: 123-ADD; 456-ADD; etc. Press TV to exit, test. If not working, then use (a). -
Page 6: Tv And Stb
Flipper has two channel entry formats. The format depends on your box and may require trial and error. One format uses the box’s OK/ Enter signal, which is LC in Flipper. This may change channels faster. The other does not use OK / LC. - Page 7 In some boxes, LC will trigger a Menu. If it does, do not use LC; In other boxes, LC will trigger a Menu only in 4 digit channels. If so, then use LC for all but 4 digit channels. Program Favs: Press and hold STB and ADD at same time till light turns solid;...
-
Page 8: Soundbars
On/Off Options: Flipper is preset to turn on and off the TV and STB by default. Occasionally, a user may experience one device on while the other is off. To Modify so only TV turns on and off: TV Only: Press and hold ADD till light turns solid, then enter 999. -
Page 9: Code Search
CODE SEARCH Start with the TV and STB on. Code search sends codes from the database to your TV or STB to search for a match. When the device turns off, a match is found. Press and hold the device you want to search (TV or STB) till light solid, then enter code for region;... -
Page 10: Learning
Do this procedure in low light, as light can interfere with the IR signal. Place Flipper and your device remote on a table with the front facing each other; On Flipper, press and hold TV (or STB) and On/OFF at the same time till light starts to flash.
Need help?
Do you have a question about the Two-Device Universal and is the answer not in the manual?
Questions and answers