Advertisement
The correspondences between the Input/Output Buses and
Device Port on the VST connection window are as follows:
Cubase Inputs
Input Bus
MOTIF-RACK XS Main
MOTIF-RACK XS 1/2
MOTIF-RACK XS 3/4
MOTIF-RACK XS 5/6
MOTIF-RACK XS 7/8
MOTIF-RACK XS 9/10
MOTIF-RACK XS 11/12
MOTIF-RACK XS 13/14
Cubase Outputs
Output Bus
MOTIF-RACK XS Main
MOTIF-RACK XS Asgn
MOTIF-RACK XS mLAN
■ Song import from MOTIF XS6/7/8
With Extensions for Steinberg DAW installed, Song data
recorded to the tracks of the MOTIF XS6/7/8 can be imported to
a Project in Cubase on your computer. Keep in mind that audio
data included in the song as well as MIDI events can be imported
while the Mixing setup cannot be imported. Song data of the
MOTIF-RACK XS can not be imported.
Follow the instructions below:
1
In the File mode of the MOTIF XS, save all user data
created on the MOTIF XS (with the File Type set to
"All") to the USB storage device connected to the
USB TO DEVICE connector. Next, remove the USB
storage device from the MOTIF XS, and then insert
it to the USB connector of the computer.
The file with the extension ".X0A" will be saved to the USB
storage device.
Device Port
MOTIF-RACK XS 1
MOTIF-RACK XS 2
MOTIF-RACK XS 3
MOTIF-RACK XS 4
MOTIF-RACK XS 5
MOTIF-RACK XS 6
MOTIF-RACK XS 7
MOTIF-RACK XS 8
MOTIF-RACK XS 9
MOTIF-RACK XS 10
MOTIF-RACK XS 11
MOTIF-RACK XS 12
MOTIF-RACK XS 13
MOTIF-RACK XS 14
MOTIF-RACK XS 15
MOTIF-RACK XS 16
Device Port
MOTIF-RACK XS Main L
MOTIF-RACK XS Main R
MOTIF-RACK XS Asgn L
MOTIF-RACK XS Asgn R
MOTIF-RACK XS mLAN L
MOTIF-RACK XS mLAN R
If the MOTIF XS and your computer are connected to the
same Ethernet network, you can save the data (the file with
the extension ".X0A") to the hard disk drive of your com-
puter.
2
On your computer, select [File] → [Import] →
[MOTIF XS Song...].
The "Import MOTIF XS Song" dialog box appears.
3
From the "Import MOTIF XS Song" dialog box,
select the file saved in step 1 above, and then click
[Open].
The "Select directory" dialog box appears.
4
From the "Select directory" dialog box, select the
destination folder to which the project file of
Cubase is to be saved, then click [OK].
The "Import Options" dialog box appears.
5
From the "Import Options" dialog box, select the
song and track(s) to be imported, then click [OK].
Extensions for Steinberg DAW
Owner's Manual
5
Advertisement
