CONNECT PLUMBING
lines up with the outlet drain pipe.
2. Securely connect all plumbing, including the drain
codes and ordinances.
49-4000231 Rev 0
Installation Instructions
Sink
Rotate the disposer
as needed to align
with the drain pipe
Outlet
Sink
Secure all plumbing
connections
Outlet
INSTALL SPLASH GUARD AND
STOPPER
•
Insert the stopper over the splash guard.
NOTE: Both the splash guard and stopper may be
removed and cleaned as needed.
CONNECT POWER AND TEST FOR
LEAKS
• lug the disposer into an outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
• Run water to check the disposer for leaks 24 hours
after installation and first operation.
• Keep and refer to this Owner's Manual for proper use
and care of this disposer.
Stopper
Splash
Guard
Sink
13