Doss SoundBox Updating Instructions page 3

Hide thumbs Also See for SoundBox:
Table of Contents

Advertisement

Available languages

Available languages

手順は下記
1、 添付のファームウェアをmicroSDカードに入れます (ファームウェアネームを変更しないでください)
2、スピーカーをオンした状態で、microSDカードをスピーカーに挿入します
3、この時自動的にアップデート中となります。(アップデートする時、約1分がかかります)、アップ
デートが完了後、スピーカーは自動的にオフになります。
4、microSDカードをスピーカーから取り出して、アップデートが完了しました。もし、SDカードを使う
音楽を再生する場合、microSDカードの中のファームウェアを削除してください。 (削除しないなら、ア
ップデートすることは繰り返します。 念のため、 ファームウェアはパソコンでバックアップしてください。 )
5、もし、ファームウェアのアップデートできないなら、手元のmicroSDカードのフォーマットを確認し
てくださいね。
ご注意:microSDカードのフォーマットは4種類となります:FAT FAT16 FAT32 EXFAT.
ファームウェアのアップデートはFAT,FAT16,FAT32を適用します。 もし、 手元のmicroSDはEXFATなら、
FAT、FAT16、FAT32に変換してください。
お客様はわかりませんところがあれば、ぜひ本社のサポートメールsupport_jp@dossav.com に連絡し
てくださいね。

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SoundBox and is the answer not in the manual?

Questions and answers

Connor Woods
March 7, 2025

When I plug the auxiliary audio cable in, no sound comes out. Is it somehow muted? Thank you!

1 comments:
Mr. Anderson
March 7, 2025

The Doss SoundBox XL does not recognize the auxiliary input after replacing the aux port. The unit detects Bluetooth and SD card modes but does not switch to aux. The solder joints are clean, and the replacement aux port is external. The issue may be due to improper connection, a faulty replacement part, or a circuit issue preventing the device from detecting the aux input.

This answer is automatically generated

Table of Contents