Advertisement
Timber Base: Hammer a piece of 50mm x 50mm timber to the timber frame
directly under the door opening to strengthen the door guide. Use at least three
self-drilling screws to drill through the top of the door guide into the 50mm x
50mm timber as shown.
50mm x 50mm timber
Concrete Base: Drill three holes through the top of the Door Guide to expose the
concrete step. Use suitable masonry fasteners, such as dynabolts, to attach the
Door Guide to the Concrete Base.
Door guide
F:\C - E\Christie Garden Products\Sheds\Shed 2355 x 4665\Shed 2355 x 4665 Assembly Instructions Rev 1.docx
Door
Self-drilling screw
Door
Door guide
50mm x 50mm timber
Masonry fastener
Concrete Base
Timber
frame
12
Advertisement
