Basic Features Of The Cd Player - Kompernass KH 3300 Operating And Safety Instructions Manual

18
CD PLAYER
DANGER! The CD player uses a weak but sharply focussed laser beam to scan the surface of the CD. If the device is used improperly then this beam can be
dangerous to the eyes - never open the case.
19
INSERTING A CD
01) Press the CD button (20) and press the Open/close button (22) on the top of the device to open the CD compartment (10).
02) Insert the CD with the playing side facing into the device. If you have done this correctly, you should be looking at the printed side.
The CD must be placed securely on the central pin.
03) Close the CD compartment (10) by pressing the Open/Close button again (22).
04) The display (15) shows the total playing time and the number of tracks.
NOTE: When you insert a CD, if the display does not show the number of tracks and the total playing time then the CD is possibly the wrong way round or dirty.
Clean the CD with a CD cleaning cloth or insert the CD correctly and check the display again.
20

BASIC FEATURES OF THE CD PLAYER

• START PLAY: Press the PLAY/PAUSE button (14) - to start playing.
• INTERRUPT PLAY (PAUSE): Press the PLAY/PAUSE button (14) - to interrupt playing.
The display (15) shows a flashing duration of play. Press the PLAY/PAUSE button (14) once more - to continue playing.
• STOP PLAY: Press the STOP button (11) - to stop playing.
• NEXT TRACK FORWARD: The Forward button (8) jumps play forward one track each time it is pressed.
• NEXT TRACK BACKWARD: The Reverse button (12) jumps play backward one track each time it is pressed.
• GO FORWARD: Keeping the Forward button (8) pressed goes forward within a track.
• GO BACKWARD: Keeping the Reverse button (12) pressed goes backward within a track.
You can open the CD compartment (10) at any time by pressing the Open/Close button again (22). Play stops automatically.
Remove the CD only when movement has stopped completely.
21
PROGRAMMING A TRACK SEQUENCE [ " TRACK MEMORY " ]
Programming a track sequence can only be done when the CD has stopped. You can program up to 20 tracks.
01) Press the CD button (20).
02) Insert a CD (see "Inserting a CD" above).
03) Press the MEMORY/CLK-ADJ button (9). The display (15) shows TRACK MEMORY.
04) Using the Forward button (8) or Reverse button (12), select the number of the track you wish to play first.
20