Kompernass KH 3300 Operating And Safety Instructions Manual page 19

04) Confirm your selection with the Timer button (6).
05) Press the MODE/REMAIN (5) button – the current time is displayed.
06) Press the MODE/REMAIN (5) button again – the switch-on time and "ON" flash for 5 seconds.
07) Press the MEMORY/CLK-ADJ button (9) once - the hour display flashes.
08) Set the hours using the Forward button (8) or the Reverse button (12).
09) Press the MEMORY/CLK-ADJ button (9) again - the minute display flashes.Set the minutes using the Forward button (8) or the Reverse button (12).
10) Press the MEMORY/CLK-ADJ button (9) again - the switch-on time is stored.
11) Then switch off the Designer Audio Unit (ON/OFF button (1).
Note: You must enter a switch-on time before you can program a switch-off time.
If you enable the switch-off time feature, your Designer Audio Unit will always switch off at the set time.
01) Press the Timer button (6), the display (15) shows TIMER.
NOTE: You have five seconds to complete the following steps. Otherwise the process is halted and you must begin again with step 2).
02) Press the MODE/REMAIN button (5) until the display (15) shows the time and TIMER OFF flashes.
03) Press the MEMORY/CLK-ADJ button (9) once - the hour display flashes.
04) Set the hours using the Forward button (8) or the Reverse button (12).
05) Press the MEMORY/CLK-ADJ button (9) again - the minute display flashes.
06) Set the minutes using the Forward button (8) or the Reverse button (12).
07) Press the MEMORY/CLK-ADJ button (9) again - the switch-off time is stored.
To switch off the TIMER functions, press the TIMER button (6) repeatedly until the display (15) shows TIMER.
12
ACTIVATE SLEEP FUNCTION [ " SLEEP " ]
Note: These settings can only be made using the remote control.
You can set a time of between 90 and 10 minutes, after which the device switches itself off.
Switch off the device and set the desired sound source with the Tuner (17), AUX (25) or CD (20) button.
• To activate a switch-off time of 90 minutes, press the SLEEP button once briefly.
• To set a shorter switch-off time, keep the SLEEP button pressed until the display (15) shows the desired time.
• To switch off the Sleep function, press the SLEEP button repeatedly until the display (15) no longer shows SLEEP.
13
SETTING UP THE AERIAL
If you use the wire aerial for FM reception:
18