Page 1
CRW4416SX SERIES User Guide Guide de l’utilisateur Bedienungsanleitung...
Page 2
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Systems Technology, Inc. 100 Century Center Court, San Jose, CA95112, U.S.A.
Page 3
Laser Diode Properties Material : GaAlAs Wavelength : 783-789 nm Emission Duration : Continuous Laser Output Power : Less than 44.6 W* his output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. ANSI Class : Class 1 CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT...
Page 4
• CRW4416SX is a sophisticated electronic device. Handle it with care. • If the fuse blows, CRW4416SX should be checked by a qualified engineer. Do not just replace the fuse. Replacing the fuse by yourself may cause the protec- tion circuit to be damaged.
Page 5
Do not block the CRW4416SX ventilation slots. Install CRW4416SX with at least 10 cm of free space all-around. • Make sure the CRW4416SX power cord is not located in a posi- tion where it is likely to be walked on or pinched by other equipment.
Operating Precautions Operating Precautions • Do not subject CRW4416SX to impact or shock when in use. This may impair recording or playback. • Do not place heavy objects on CRW4416SX. • Avoid moving CRW4416SX from cold to warm places, and avoid sudden room temperature rises, as condensation that could cause CRW4416SX to malfunction may occur.
Page 7
If CRW4416SX is vibrated while recording, the recording may fail. To avoid such failures observe the following practices: • Place CRW4416SX on a solid, stable surface, away from high- traffic areas. The surface must allow CRW4416SX to operate in a level, horizontal position.
CRW4416SX Features 4xS Recording (Rewritable) - 4xS Recording (Recordable) - 16xS Reading The CRW4416SX is able to write (overwrite) CD-RW discs at quad speed, double speed, and is able to write CD-R discs at quad speed, double speed, or normal speed.
New sessions can be written later. Packet Writing This is useful for data back-up. Smaller units of data can be added to tracks. To use this mode, your software must support Packet Writing. The CRW4416SX supports both sequential and random packet writing.
Chapter 1 - System Configuration Before using the CRW4416SX, make sure that you have all of the items on the list of included items. In order to use the CRW4416SX, you will require the following. Computer The following operating environment is required: For an IBM/AT compatible computer •...
Please use discs that are compliant with Orange Book Part 2. (If you wish to write data at 4X speed, you must use discs which sup- port 4X speed writing.) Yamaha recommends the following Yamaha CD-RW discs: • CRWM74B4X ( 120mm, 74 minutes) • CRWM74R4X ( 120mm, 74 minutes)
4 ON/DISC LED This indicator lights up in orange when the CRW4416SX is powered on, and lights up in green when the CRW4416SX contains a disc. 5 READ/WRITE LED This indicator lights up in green when data is being read, and flashes when data is being accessed.
This button is used to open or close the tray. 8 POWER switch This is the main power switch. Use it to power CRW4416SX on and off. CRW4416SX and any other devices connected to the SCSI chain must be powered on before the host computer is powered on.
SCSI device, the Plug and Play component of Windows 95 or Windows 98 will automatically assign an unused number to the CRW4416SX (SCAM protocol level 1).
Page 16
Terminator ON TERMINATOR Terminator OFF TERMINATOR Use this setting if the CRW4416SX is the last device in the SCSI daisy-chain. Use this setting if devices other than the CRW4416SX are in the SCSI daisy-chain and the CRW4416SX is not the last...
(1) or (2), and connect the other end of the SCSI cable to the host computer. The CRW4416SX is not supplied with a SCSI cable. You will need to obtain one that will fit the drive and the host computer connectors.
Chapter 4 - Operation Chapter 4 - Operation Loading a Disc 1. Press the eject button to open the tray. 2. Carefully place the disc, label-side up, on the disc tray. 3. Press the eject button again to close the disc tray. Important: Take great care when handling CD-ROM discs.
Press the eject button to eject the disc. Note: You cannot eject the disc if the SCSI command prohibits the eject oper- ation while the CRW4416SX is reading data. Caution: Be sure to remove the disc after it is completely ejected. (Trying to remove the disc before it is completely ejected may cause the drive to malfunction.)
1. Insert the pin-like tool into the manual eject hole and push gently. The spring-loaded mechanism ejects the disc. 2. After manually ejecting a disc, you must turn off the power supplied to the CRW4416SX, then turn it on before continu- ing. PO W ER RE AD /...
Troubleshooting If CRW4416SX is not performing as expected, look up the symptoms in the following table, and take the appropriate corrective action. Symptoms The power to the CRW4416SX is off The power to the computer is off The CRW4416SX is not recognized by the...
Front Panel Indicator Key on: green on: orange Status Reset Ready (no disc) Inserting disc Ejecting disc Ready (disc inserted) Seeking Preparing to write Writing Writing (test mode) Playback flashing: green — off flashing: orange ON/DISC READ/WRITE — Appendix — —...
Page 24
French: Pour plus de détails sur les produits, veuillez vous adresser à Yamaha ou au distributeur le plus proche figurant dans la liste suivante : German: Bei weiteren Fragen wenden Sie sich Sitte an Ihren Händler oder eine der folgenden Firmen.