Yamaha RX-N600D Owner's Manual page 68

DAB (DIGITAL AUDIO BROADCASTING) TUNING
Note
If the initial scan operation was not successful, "Not
Available" appears in the front panel display. In such cases,
press A/B/C/D/E on the front panel (or u / d on the remote
control) to start "INIT SCAN" automatically.
y
• You can cancel the initial scan operation in the middle by
pressing RETURN on the remote control. When
"BREAK?[ENTER]" appears in the front panel display,
press ENTER on the remote control to return to "INIT
SCAN".
• For further details about problems and their proper
remedies, see the "Tuner" section in
"TROUBLESHOOTING" on page 115.
66
En
■ Tuning aid
B)TUNE AID
Use this feature to display the strength of the current DAB
signals in the front panel display. You can use this feature
to adjust the positioning of the DAB antenna and this unit.
It is recommended that you perform this operation when
setting up this unit in order to maximize the DAB
reception capability.
1
Press u / d to select "TUNE AID" in "DAB
MENU", and then press ENTER.
For details, see "Using DAB MENU" on page 64.
The signal strength level of the selected DAB channel
appears in the front panel display.
Display status: 0 (none) to 100 (best)
PRESET/CH
ENTER
A/B/C/D/E
NET DVR V-AUX
USB
SP
A
5A LEVEL: 80
PCM
Selected DAB
channel label
2
Press j / i to switch between channel labels.
PRESET/CH
ENTER
A/B/C/D/E
y
For a complete list of channel labels, see "DAB frequency
information" on page 122.
3
Press ENTER.
This unit returns to the "TUNE AID" menu.
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
MD/CD-R pTUNER
DTV/CBL DVD CD
VOLUME
DAB
L
Signal strength level
5B LEVEL: 40
B)TUNE AID
dB
R