Ironing Without Steam; Vertical Steaming - Bosch SensorSteam TDS12 Series Operating Instructions Manual

After the initial 1 minute period:
• The green lamp (5) stops lashing.
(clear light) goes on and starts lashing.
From this moment on, when the handle (1) of the
iron is gripped or if the steam activation button (2)
is pressed at steam setting:
stops lashing.
If the handle (1) is released:
lash
If the iron remains plugged in and is not used for
several minutes:
lashing.
Ironing with steam
The steam control is used to adjust the amount
of steam produced when ironing (see "setting the
steam amount" section).
1. Continuous steam generation :
2. Steam on demand :
Important :
Ironing without steam
This enables the iron to be used for dry ironing.
Spray
This can be used to remove stubborn wrinkles.
Shot of steam
This can be used to remove stubborn wrinkles or to
(4)
press in a sharp crease or pleat. It cannot be used
on a synthetic setting for delicate items.
Vertical steaming
This can be used to remove creases from hanging
clothes, curtains etc. It cannot be used on a
synthetic setting for delicate items.
Warning!
Do not iron clothing while it is being worn!
Never spray or aim the steam at persons or
animals!
eco
(5)
(6)
(7)
(8)