Continental Motors A Series Operator's Manual page 20

12
PRESTARTING.
Before each flight the engine and propeller should be examined for
damage, oil leaks, security and proper servicing.
1.
Position the ignition switch to the "OFF" position.
2. Operate all controls and check for binding and full range of
travel.
3. Assure that fuel tanks contain proper type and quantity of
fuel.
4. Drain a quantity of fuel from all sumps and strainers into a
clean container. If water or foreign matter is noted, continue
draining until only clean fuel appears.
5. Check oil level in sump.
6., Check cowling for security.
STARTING
1.
Fuel Selector - On.
2. Battery Switch - On.
3. Ignition Switch - On.
4. Mixture - Full Rich.
5. Throttle - Full Open.
6. Prime - Operate 3 to 5 strokes.
NOTE . . . The amount of prime required depends on engine
temperature. Familiarity and practice will enable the operator to