Position #2 - Easy Access Trade Series Operating Procedures And Safety Instructions

POSITION #2

STAIRWAY STEPLADDER
1) To configure the OX Multi-Ladder into the
Stairway Stepladder position – this position
is used when the user needs to work in a
stairway.
2) To achieve this position, configure the ladder
in the stepladder configuration as described
in position #1. Raise to desired height.
3) Lower one side of the inner section until the
desired step height is reached as described
in position #2 above.
4) Position ladder on stairway, ensuring all legs
are on firm ground or steps.
- Always face ladder and maintain firm grip while on it.
- DO NOT stand on or above second rung from top of ladder.
CAUTION
9