Front View - Pioneer BDR-X12UBK Operating Instructions Manual

Interface

Front view

1 Forced Ejection Hole
Insert a stiff rod into the hole and push to eject the tray when the tray doesn't open by pressing the Eject
button. During normal operation, the eject button should be used to unload the tray. Make sure the power
to the drive is turned off and wait more than one minute till the disc rotation is stopped when accessing the
eject hole.
2 Disc Tray
Open the tray by pressing the eject button, then place only a BD, DVD or CD disc into the tray with the label
facing up.
Press the eject button to load the tray with the disc.
Do not attempt to pull out the disc tray forcibly.
3 Indicator
Operation status is indicated as follows.
When power off
When power on
When reading
When writing
When tray opening/closing
4 Eject Button (h)
Opens and closes the disc tray.
* When connected to a Mac computer, this button cannot be used if a disc is inserted.
10
En
1
Off
On
Flashing
Flashing
On
2
3 4