Draper EC2000/PRO Instructions

2 tonne folding hydraulic engine crane

INSTRUCTIONS FOR

2 Tonne Folding

Hydraulic Engine Crane

Stock No.43924

Part No.EC2000/PRO

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND

EFFECTIVE USE OF THIS PRODUCT.

GENERAL INFORMATION

Read all these instructions before operating this product and save these instructions.

This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed and

should be kept with it for future references.

This manual describes the purpose for which the product has been designed and contains all the necessary information

to ensure its correct and safe use. We recommend that this manual is read before any operation or, before performing

any kind of adjustment to the product and prior to any maintenance tasks. By following all the general safety instructions

contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tools policy of

continuous improvement determines the right to make modifications without prior warning.

Table of Contents

Do you have a question about the EC2000/PRO and is the answer not in the manual?

Page 1 Read all these instructions before operating this product and save these instructions. This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed and should be kept with it for future references.
Page 2 DECLARATION OF CONFORMITY We : Draper Tools Ltd., Hursley Road, Chandler’ s Ford, Eastleigh, Hampshire. SO53 1YF . England. Declare under our sole responsibility that the product: Stock No:- 43924. Part No:- EC2000/PRO. Description:- 2 TON ENGINE CRANE. To which this declaration relates is in conformity with the following directive(s) 2006/42/EC.
Page 3 ASSEMBLY, USE AND OPERATION ASSEMBLY, USE AND OPERATION As we are handling heavy elements, it is essential to carry out the following assembly processes with the help of other people. - To assemble the legs (10 and 11) of foldable cranes, it is necessary to position the crane on the ground with the wheels in the position indicated in Figure 18.
Page 4 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

43924