Menu Commands And Settings - XM Satellite Radio Portable Satellite Radio Operating Manual

Menu Commands and Settings

Pressing enters the menu section of
SKYFi. Here, you can change each of the fol-
lowing options using the scroll wheel
on the receiver or the
on the remote control. While in the menu
11
section, acts as a "back" button, allow-
ing you to back out of existing sections.
Following are the settings that can be
changed:
Brightness + Contrast
This control allows you to adjust the bright-
ness and contrast of your display. You may
find you need to use this when you switch
between in-car and indoor use.
Memory Recall
This is an alternative way of entering memory
recall mode. It functions the same as pressing
and holding
keys and
Channel Skip/Add
You can skip channels in your SKYFi channel
list to prevent them from being accessible
with the SKYFi scroll wheel
or
still be accessed by DIRECT entry or by using
a preset key. They can also be added back to
the list later.
To completely lock SKYFi from receiving a chan-
nel, call XM Customer Care at 1-800-852-9696.
.
or the remote
keys. Deleted channels can
Line Out Level
Use this to adjust the SKYFi Receiver audio-
level output if it is too high, causing distortion,
or too low for your car or home/office stereo.
Most users will NOT need to change this level
from the factory setting. This is not a volume
control. You should set the volume using the
audio system connected to your SKYFi
Receiver.