Advertisement
7. Repeat this procedure as necessary if pacifying is interrupted during use.
TO RECALL THE LAST TEMPERATURE:
1. Press and hold the power button while turning on the unit. The last measured temperature will be shown in the LCD
display with the letter "M" shown under the degree sign in approximately 3 seconds.
2. Release the power button. The thermometer will be in "ready-to-measure" mode and the recalled temperature will
be erased. Note: If the device is switched off before completion of temperature taking,
L°F will appear in memory the next time the unit is used.
CLEANING INSTRUCTIONS:
1. Clean the pacifier thermometer by wiping it with soap and warm water or rubbing alcohol (70% isopropyl alcohol).
2. Wipe dry with soft cloth. Cover thermometer with the storage case included and store in dry location.
3. Store your thermometer in a dry location free from dust and contamination and away from direct sunlight.
Note Do not boil or clean in a dishwasher. This will cause the thermometer to no longer function and will void the
warranty. Do not wash the unit with any thinner or chemical solvent.
SPECIFICATIONS:
Battery Life: More than 200 hours of continuous operation.
Accuracy:
Temperature Range:
Beeper:
ONE YEAR LIMITED WARRANTY:
You should first read all Instructions before attempting to use this product.
A. This 1 year limited warranty applies to repair or replacement of product found to be defective in material or
workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or
supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing
defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON
THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not
allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies
only to the original purchaser of this product from the original date of purchase.
B. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship.
C. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in
accordance with the instruction manual.
Call us toll-free at 1-800-477-0457 or e-mail: consumerrelations@kaz.com.
Please be sure to specify a model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR
WARRANTY. DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO
OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE
PRODUCT OR PERSONAL INJURY.
© 2016 All rights reserved.
Kaz USA, Inc., a Helen of Troy Company, Marlborough, MA 01752
This product is distributed under license from The Procter & Gamble Company.
VICKS and other associated trademarks are owned by The Procter & Gamble Company
www.kaz.com
Printed in China
+/-0.2°F between 98.0-102.0°F
at room temperature of 71°F.
90.0° - 109.0°F. If less that 90.0°F an
"L" is displayed. If more than 109.0°F
an "H" is displayed.
Unit will beep for approximately
8 seconds when peak temperature is
reached.
Test Protocol (Laboratory use only):
1. Place thermometer into a stable liquid bath
with a temperature set above 95°F. The nipple
of the thermometer should
be approximately 2cm below the surface.
2. Wait for 90 seconds, then turn thermometer
on by pressing the blue
On / Off button. The thermometer
is now in standard mode.
3. When the measurement is completed
(approximately 2 minutes), record the
temperature reading.
P/N: 31IMV925191R1
24MAR16
Advertisement
