Remote Control - Xerox DP 820 User Manual

Remote Control

Laser Beam Pointer
Xerox DP 820 User's Guide
Button
Power
(Enter)
Directional Selection
Buttons
( )
Menu
Laser
Keystone ( + – )
Volume ( + – )
Mute
Resync ( )
Source ( )
Hide
4:3/16:9
NOTE: The battery compartment for the remote control is on
the back. The instructions on the compartment show how to
install the batteries properly.
Description
Turns projector power on and off.
When the OSD menus are displayed, selects
OSD option.
When the OSD menus are displayed, scrolls
through menus and selects items or adjusts
settings.
Press to display the OSD menus. Press again
to exit the OSD menus.
Press to activate a laser beam for use as a
pointer. Warning—Do not look into the laser
beam or shine it into others' eyes when using
the remote control as a laser pointer. Laser
light can seriously damage eyes.
Adjusts image distortion caused by tilting the
projector. Images are wider at the top or
bottom due to tilting the projector.
Not recommended for spreadsheets or text
displays to avoid text distortion.
Adjusts volume level. Press Volume + to
increase the volume. Press
decrease the volume.
Turns off sound. Press one of the Volume
buttons to resume sound.
Adjust the frequency and phase for the
connected components to produce the
optimum projected image.
Manually selects an input source.
Hides image being displayed and displays a
blank screen. Press again to resume display of
image. Typically used to pause a presentation.
Toggles the image aspect ratio to 4:3 or 16:9.
User Controls
Volume –
to
17