Mayflash F300 Fightstick; Device Mode - Quadstick FPS User Manual

Mayflash F300 Fightstick

The Mayflash F300 is a heavy arcade style
fightstick with an eight-way digital joystick and
eight large buttons.
The joystick can control either the D-Pad buttons
or the Left Analog stick (outputs 0 or 100% only).
Since it is not analog, it is not really suitable for
applications requiring fine control, but works well
for WASD or character movement in first person
shooters.
The left stick and buttons show up under the
same inputs names as the UltraStik.

Device Mode

Through the use of a USB A-to-A cable, the Quadstick can switch to a second Host, like a PC or
game console. The
enable_usb_a_device
is active:
• Do not set the value of the enable_usb_a_device to 1 in the prefs.csv or default.csv files.
You may lose the ability to connect to your Quadstick. Only use the feature in other
configuration files that are selected after power up.
•
Power for the Quadstick only comes through the USB-B port, so it must remain
connected to a power source while using the USB-A port in device mode.
• CronusMax Full Crossover, with a USB hub, will not operate with USB connections that
ever change after they first connect. This means you cannot disconnect from a Full
Crossover connection on USB B to a separate host on the USB A then back again. The
CronusMax in Partial Crossover mode does not have this limitation and you can switch
back and forth at will.
preference on a Preferences sheet controls which port
Preferences
Preference
enable_usb_a_device
Value
1
67