Download
Share
Print this page
LAON TECHNOLOGY LT550 EXPERT SYSTEM RBS25 Quick Reference
  1. Manuals
  2. Brands
  3. LAON TECHNOLOGY Manuals
  4. Intercom System
  5. LT550 EXPERT SYSTEM RBS25
  6. Quick reference

LAON TECHNOLOGY LT550 EXPERT SYSTEM RBS25 Quick Reference

Wireless
Hide thumbs

Advertisement

Quick Links

Download this manual
LaON LT550 EXPERT SYSTEM with RBS25 QUICK REFERENCE
1) SYSTEM AT A GLANCE and HOW TO SUPPLY THE POWER
1-1) BS (Base Station)
3
1
2
[Figure 1-1] Front panel of the Base Station, LTWI-BS550
1. BS Headset TALK button with indicator light
2. BS communication group selection
3. 4-Wire on/off button with indicator light
4. 4-Wire communication group selection
5. AUX IN, AUX IN/OUT on/off with indicator light
6. AUX IN, AUX IN/OUT comm. group selection
7. RF ALERT indicator light
8. Remote Base Station LINK Indicator light
9. Remote Base Station ACTIVE indicator light
1
[Figure 1-2] Rear panel of the Base Station, LTWI-BS550
1. Antenna connector
2. AUX IN connector
3. AUX OUT connector
4. 4-Wire and Multiple Base Station connector
5. Power switch
6. Antenna connector
(Ver.1.1_30 JULY 2017_'LT550 EXPERT')
17
5
6
4
2
3
7
ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
7
8
10
9
16
12
11
10. Headset speaker volume control (UP)/ Menu selection
11. Headset speaker volume control(DOWN)/ Menu Selection
12. Menu selection (LEFT)
13. Menu selection (RIGHT)
14. Menu SET button
15. Headset cable connector
16. Hands free/PTT mode selection
17. OLED menu display
4
8
9
10
7. 8-Ohm speaker 2-pin spring clamp connector
8. USB connector
9. LAN RJ-45 connector
10. Power connector
11. Wall-mount bracket holder (on the bottom)
15
14
13
5
6
11

Advertisement

loading

Related Manuals for LAON TECHNOLOGY LT550 EXPERT SYSTEM RBS25

Summary of Contents for LAON TECHNOLOGY LT550 EXPERT SYSTEM RBS25

  • Page 1 8. USB connector 3. AUX OUT connector 9. LAN RJ-45 connector 4. 4-Wire and Multiple Base Station connector 10. Power connector 5. Power switch 11. Wall-mount bracket holder (on the bottom) 6. Antenna connector ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 2 Then the BS screen on the front panel of the BS will be displayed. Wait for one(1) minute until the RF channel is scanned automatically for the Base Station. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 3 Do the same to turn off the BP. ※CAUTION  While you do not use the system long, store the battery after charged and separate from the Belt Pack.  Turn off the Belt Pack when charging. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 4 There are two ways to supply power to RBS as following;  Power of Ethernet(PoE) Hub  LaON provided power adapter Upon the power supply to the RBS, it will be turned on automatically without pressing the power button. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 5 Touching any button on the front panel of the Base Station will have the screen waken up.  RESET Menu and RF CH SELECTION Menu are basically not to be used by users frequently. Please make an enough caution to use these menus. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 6 Press PWR button on any menu displays of the BP will make you return to the NORMAL menu.  From the NORMAL Menu, you can monitor the applicable RSSI signal, the linked device, battery status, hands free on/off status, group number selected and BP ID(Label). ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 7 UP/DOWN keys. Press SET to save and move to ‘Group # column’ and select group or groups for the applicable BP by pressing SET button onto each number. Move onto the icon and stay. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 8 8. [Figure 6] NORMAL menu (Initial display of BS) [Figure 7] MAIN menu (menu selection) RBS # Pairing status indication icon Link status indication [Figure 8] RBS menu ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 9 PoE Hub, specification of the LAN cable in use, LAN cable connection status and then RF LINK and ALERT light indications. And implement the pairing setup again to retrieve. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 10 Connect the BS and RBSs through LAN cable. The LAN port can be found from the rear panel of the BS or 19” cascade kit and bottom of the RBS. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 11 When the BS and RBS are properly connected, The BS LINK LED light on the front panel of the RBS and the RBS LINK LED light on the front panel of the BS will go on in green. [Figure 12] System usage example ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 12 On 5GHz, there are approximately 15 RF channels worldwide. If 1 BS with 8 RBSs are needed to install, the BS will firstly scan and occupy the best RF channel and then, RBS1(R1) will secondly scan and occupy the next best available channel, then RBS 2→3→4→5→6→7 and 8 in order. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 13  Industry top level best-in-class audio performance with low latency with audio clarity  Up to 5 communication group channels can be allocated to the Base Station, Belt Pack, 4W ⓒ2016 LAON Technology Co., Ltd. All rights reserved.

  • Page 14: Troubleshooting

    If the BP pairing setup does not work or the BP is not linked to the BS, confirm if the BS antenna is firmly connected or if there is a defect on antenna parts. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.
  • Page 15 Reboot the system with BS toggle power switch then wait until all the rescan is completed and try again.  If the issue is still not solved out though above actions, please contact the distributer in your local area or the manufacturer, LaON Technology at support@laon-tech.com. ⓒ2016 LAON Technology Co., Ltd. All rights reserved.